LHS220-24B Double frequency conversion tension free rod small

φ0.10mm--φ0.40mm

一、the machine overview

LHS220/24Bfine wire drawing machine is an internationally advanced fine wire drawing machine newly developed by our factory that is controlled by computer. Its break line adopts non-contact-type automatic stopping and trayful automatic stopping. Winding-up and tension is linearly controlled during the whole process with four technical parameters being directly displayed. In particular it adopts color touch screen for control and display and directly displays sliding parameters, linear velocity, winding-up speed, current weight and meter, output of 3 operation teams and output parameters of single tray with memory function. This machine uses draw bench, winding-up and double frequency conversion tension-free pole PLC control means, its flat cable adopts servo motor and the guide wheel adopts back-and-forth flat cable. This machine has characteristics of high line speed, high capacity and variable frequency control.
 

二、technical parameters

Serial number
Name
Data
1
Incoming line
φ0.55mm—φ1.2mm
2
Finished product line
φ0.10mm--φ0.40mm
3
Maximum line speed
2200m/min (50--100kg Capacity of receiving line )
4
Maximum mold number
24(1+11+11+1)
5
Reduction rate
15% Final :14%
6
Wire drawing mode
Up and down 2 ,4 groups of pulley 、Double mould rack 、Spray sliding type
7
The cone pulley
φ220×11,The 4 group,Capstan φ220,The 1 group,Ceramic spray cone pulley
8
Main motor 15 KW
〈Y2-160M-2 〉 Three-phase AC
9
wire winding motor 5.5 KW
〈Y2-132S1-2 〉 Three-phase AC
10
Winding motor (servo motor)
20B30CB Single phase AC
11
water pump motor
125W JCB-22 Three phase AC pipeline pump (Customer matching )
12
wire drawing lighting
36V 220W
13
Receiving line lighting
220V 7W-11W Energy saving light
14
Electromagnetic Stop device
24V 30W
15
speed control mode
Control small electric cabinet panel multi ring position, potentiometer speed regulation
16
traverse method
Ball screw drive, servo motor positive and negative, maximum width 250mm~280mm
17
lubricating system
Fan shaped spray type (With water tank, water pump, put the line rack )
18
exterior dimensions
Length×width×height 1620×1565×1995mm
19
full car weight
2.13T
20
Reel size of receiving line
small)φ300×270×φ215×250×φ125 (Steel plate ,Dynamic balance requirement )
big)φ400×304×φ270×280×φ127 (Steel plate ,Dynamic balance requirement )
 

细节展示图