SPS60-12 dual frequency conversion precious metal micro

φ0.014mm--φ0.025mm

一、Profile of machine

 

SPS60-12dual frequency conversion precious metal fine drawing machine is an internationally advanced dual frequency conversion tension-free fine wire drawing machine newly developed by our factory that is controlled by computer. Its break line adopts non-contact-type automatic stopping and trayful automatic stopping. Winding-up and tension is linearly controlled during the whole process with four technical parameters and output of 3 operation teams and output parameters of single tray being directly displayed. Parameters are automatically locked after being set up. Sliding parameters, linear velocity, winding-up speed, flat cable distance, current weight and meters have memory function. The machine combines wind-up with flat cable. its flat cable adopts servo motor and the guide wheel adopts back-and-forth flat cable. This machine has characteristics of high line speed, high capacity and variable frequency control.

 

二、Technological parameters

Serial number
Name
Data
1
Inlet base wire
φ0.018mm--φ0.038mm
2
Outlet wire, finished product
φ0.014mm--φ0.025mm
3
Maximum line speed
1200m/min (0.1--5kgcapacity wind-up)
4
Maximum number of molds
12(11+1)
5
Percent reduction
6% final:5%
6
Wire drawing means
2 sets of cone pulleys、2 constant speed pulleys、spray sliding type
7
Cone pulley used
φ60×11sections,2sets,constant speed pulleyφ60 2sets,sprayed ceramics cone pulley
8
Main engine 11 KW
Y2-90L-2 three phase alternating current
9
Winding-up dynamo0.55KW
HSB40C-12-0.55F high-speed dynamo, alternating current
10
Motor cable0.4KW
40B-30CB servo dynamo single phase
11
Water pump dynamo
90W MP-55R single phase, alternating current
12
Wire drawing light
220V 40W
13
Winding-up lighting
220V 7W-11W节能灯
14
Magnetic chock
24V 22W servo dynamo
15
Speed adjustment mode
Control multi-loop of small cabinet panel, speed adjustment by potentiometer
16
Flat cable means
Ball screw transmission, positive and negative rotation of servo motor, maximum width at160mm
17
Lubricating means
downward sprayed cone pulley, mode base automatic spray (with water tank, water pump and pay-off rack)
18
Size
Length×width× height 1450×1020×1580mm
19
Whole car weight
1.0T
20
Size of take-up reel

φ135×170×φ110×150×φ80 (Steel plate, requirements on dynamic balance)

φ110×72×φ100×68×φ15.5 (Aluminum alloy plate, requirements on dynamic balance)

φ88×52×φ80×52×φ78 (Aluminum alloy plate, requirements on dynamic balance)

 

细节展示图

  • SPS60-12 dual frequency conversion precious metal micro