SPS85-15 dual frequency conversion precious metal micro wire

φ0.017mm--φ0.035mm

一、Profile of machine

SPS85-15dual frequency conversion precious metal fine wire drawing machine is an internationally advanced dual frequency conversion tension-free fine wire drawing machine newly developed by our factory that is controlled by computer. Its break line adopts non-contact-type automatic stopping and trayful automatic stopping. Winding-up and tension is linearly controlled during the whole process with four technical parameters and output of 3 operation teams and output parameters of single tray being directly displayed. Parameters are automatically locked after being set up. sliding parameters, linear velocity, winding-up speed, flat cable distance, current weight and meters have memory function. The machine combines wind-up with flat cable. its flat cable adopts servo motor and the guide wheel adopts back-and-forth flat cable. This machine has characteristics of high line speed, high capacity and variable frequency control.
 

二、Technological parameters

Serial number
Name
Data
1
Inlet base wire

φ0.027mm--φ0.057mm

2
Outlet wire, finished product

φ0.017mm--φ0.035mm

3
Maximum line speed

1500m/min  (0.1--2kgcapacity wind-up)

4
Maximum number of molds

15(1+13+1)

5
Percent reduction

6%    Final:5%

6
Wire drawing means

2 sets of cone pulleys、2 constant speed pulleys、spray sliding type

7
Cone pulley used

φ85×13 section,2sets,constnat speed pulleyφ85,2sets,sprayed ceramic cone pulley

8

Main engine2.2KW  

Y2-90L—2    Three phase alternating current

9

Winding-up dynamo0.55KW

HSB40C-12-0.55-F  High-speed dynamo   three phase

10

Flat cable dynamo (servo dynamo)0.4KW

40B-30CB  single-phase Servo dynamo   single phase

11
Water pump dynamo

90W MP-55R single phase alternating current

12
Wire drawing light

220V   40W

13
Winding-up lighting

220V  7W-11Wenergy-saving light

14
Magnetic chock

24V   22W  servo dynamo

15
Speed adjustment mode

Control multi-loop of small cabinet panel, speed adjustment by potentiometer

16
Flat cable means

Ball screw transmission, positive and negative rotation of servo motor, maximum width at160mm

17
Lubricating means

Fanshaped spraying type          (with water tank, water pump and pay-off rack)

18
Size

Length×width×height  1520×1090×1580mm

19
Whole car weight

 1.0T

20
Size of take-up reel

φ145×170×φ110×150×φ80
(Steel plate, requirements on dynamic balance)
φ110×72×φ100×68×φ15.5
(Aluminum alloy, requirements on dynamic balance)
φ88×52×φ80×50×φ78
(Aluminum alloy, requirements on dynamic balance)

细节展示图

  • SPS85-15 dual frequency conversion precious metal micro wire