SPS100-24dual frequency conversion precious metal fine

φ0.028mm--φ0.085mm

一、Profile of machine

SPS100/24wire drawing machine is an internationally advanced dual frequency conversion tension-free fine wire drawing machine newly developed by our factory that is controlled by computer. Its break line adopts non-contact-type automatic stopping and trayful automatic stopping. Winding-up and tension is linearly controlled during the whole process with four technical parameters and output of 3 operation teams and output parameters of single tray being directly displayed. Parameters are automatically locked after being set up. sliding parameters, linear velocity, winding-up speed, flat cable distance, current weight and meters have memory function. The machine combines wind-up with flat cable. its flat cable adopts servo motor and the guide wheel adopts back-and-forth flat cable. This machine has characteristics of high line speed, high capacity and variable frequency control.
 

二、Technological parameters

Serial Number
Name
Data
1
Inlet base wire

φ0.08mm--φ0.24mm

2
Outlet wire, finished product

φ0.028mm--φ0.085mm

3
Maximum line speed

700m/min (0.1--3kgcapacity wind-up)

4
Maximum number of molds

24(1+11+11+1)

5
Percent reduction

8% final:7%

6
Wire drawing means

Upper and bottom 2 rows 4 sets of cone pulleys, dual mode and spray sliding type

7
Cone pulley used

φ100×11section,4sets,constant speed pulleyφ100,1set,sprayed ceramic cone pulley

8
Main engine4 KW

〈Y2-112M-4 〉 Three phase alternating current

9
Winding-up dynamo1.1KW

HSB60A-06-1.1-F High-speed dynamo, three phase

10

Motor cable0.4KW

40B-30CB  Servo engine  single phase

11
Water pump dynamo

90W MP-55R Single-phase alternating current

12
Wire drawing light

220V   40W

13
Winding-up lighting

220V  7W-11Wenergy saving light

14
Magnetic chock

24V   22W

15
Speed adjustment mode

Control multi-loop of small cabinet panel, speed adjustment by potentiometer

16
Flat cable means

Ball screw transmission, positive and negative rotation of servo motor, maximum width a180mm

17
Lubricating means

Fanshaped spraying type (with water tank, water pump and pay-off

18
Size

Length×width×height  1850×1005×1665mm

19
Whole car weight

 1.1T

20
Size of take-up reel

big)φ200×216×φ160 ×180×φ80
(plastic tray)
small)φ145×170×φ110×150×φ80
(Steel plate, requirements on dynamic balance)

 

细节展示图

  • SPS100-24dual frequency conversion precious metal fine