SPS120-13dual frequency conversion precious metal mini-

φ0.179mm--φ0.04mm

一、Profile of the machine

SPS120/13dual frequency conversion precious metal mini-drawing machine is an internationally advanced dual frequency conversion tension-free fine wire drawing machine newly developed by our factory that is controlled by computer. Its break line adopts non-contact-type automatic stopping and trayful automatic stopping. Winding-up and tension is linearly controlled during the whole process with four technical parameters and output of 3 operation teams and output parameters of single tray being directly displayed. Parameters are automatically locked after being set up. sliding parameters, linear velocity, winding-up speed, flat cable distance, current weight and meters have memory function. The machine combines wind-up with flat cable. its flat cable adopts servo motor and the guide wheel adopts back-and-forth flat cable. This machine has characteristics of high line speed, high capacity and variable frequency control.
 

二、Technical Parameters

Serial number
Name
Data
1
Inlet base wire

φ0.35mm--φ0.076mm

2
Outlet wire, finished product

φ0.179mm--φ0.04mm

3
Maximum line speed

650m/min  (0.1-5kgcapacity wind-up)

4
Maximum number of molds

13(1+11+1)

5
Percent reduction

8%    final:7%

6
Wire drawing means

2 sets of cone pulleys、1constnat speed pulley、spray sliding type

7
Cone pulley used

φ120×12section ,2sets,constnat speed pulleyφ120,1set,sprayed ceramic cone pulley

8
Main engine4 KW

Y2-112M-4   three phase alternating current

9
Winding-up dynamo1.1KW

HSB60A-06-1.1F    three phase alternating current

10

Motor cable0.4KW

40B-30CB  servo engine  single phase

11
Water pump dynamo

90W MP-55R  single phase alternating current

12
Wire drawing light

220V   40W

13
Winding-up lighting

220V  7W-11W energy-saving lamp

14
Magnetic chock

24V   22W

15
Speed adjustment mode

Control multi-loop of small cabinet panel, speed adjustment by potentiometer

16
Flat cable means

Ball screw transmission, positive and negative rotation of servo motor, maximum width at 180mm

17
Lubricating means

Fanshaped spraying type (with water tank, water pump and pay-off rack)

18
Size

Length× width ×height  1910×1010×1730mm

19
Whole car weight

 1T

20
Size of take-up reel

φ110×72×φ100×68×φ15.5

(Aluminum alloy, requirements on dynamic balance)

φ88×52×φ80×50×φ78

(Aluminum alloy, requirements on dynamic balance)

 

细节展示图

  • SPS120-13dual frequency conversion precious metal mini-
  • SPS120-13dual frequency conversion precious metal mini-
  • SPS120-13dual frequency conversion precious metal mini-